After all work has been done properly on the brake system, it is necessary to recalibrate it again.
Please note that the workshop mode has already been left by Carly and you have sufficient safety distance to the brake system.
To be able to calibrate the new brake pads, please operate the lever for the parking brake in the vehicle interior and hold it until the red LED lights up. That’s the sign that the servomotors are recalibrated.
If new brake wear sensors have been installed, the service interval display must be reset, of course, with Carly’s corresponding Service Reset.
After all work has been successfully carried out up to this point, it is advisable to start a diagnosis using the Carly app after each intervention on the brake system in order to localize and identify possible error messages as quickly as possible.