Coding VAG with Carly for VAG List – What is possible?

Share this with friends:

Typical VW Codings


These topics can be coded in your VW.

Daytime running lights (Northern Europe)
• active
• not active
Use front and rear exterior lights as daytime running lights (common in Northern Europe). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights (US)
• active
• not active
Use headlights as daytime running lights (common in US). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness of the activated daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – front fog lights
• active
• not active
Use front fog lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – dimmed high beams
• active
• not active
Use dimmed high beams as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – low beams
• active
• not active
Use low beams as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – off with turn signal
• active
• not active
Daytime running lights are turned off on one side when the turn signals are activated. When the hazard lights are activated, daytime running lights are turned off on both sides. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – off with handbrake
• active
• not active
Daytime running lights are turned off when the handbrake is pulled. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Head light cleaning – daytime running lights
• active
• not active
Turn head light cleaning on/off when daytime running lights are active. (ZE)


Daytime running lights (Northern Europe)
• active
• not active
Use front and rear exterior lights as daytime running lights (common in Northern Europe). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights (US)
• active
• not active
Use headlights as daytime running lights (common in US). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness of the activated daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – front fog lights
• active
• not active
Use front fog lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)


Turn signals front as parking light
• off
• 20%
• 40%
• 60%
Brightness of front turn signals as parking light. (ZE)

One-touch turn signal
• active
• not active
Activate the turn signals by tapping them. Also known as ‘Comfort turn signals’ or ‘Highway Blinking’. (ZE)


Turn signals front as parking light
• off
• 20%
• 40%
• 60%
Brightness of front turn signals as parking light. (ZE)

Parking light front – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness for front parking light. (ZE)

Parking light rear – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness for rear parking light. (ZE)

Parking light – outer tail lights
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Use outer tail lights as parking light. (ZE)

Parking light – rear fog lights
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Use rear fog lights as parking light. (ZE)


Coming home lights
• active
• not active
Exterior lights are active after locking the car for a couple of seconds. Also known as ‘follow me home lights’. (ZE)

Coming home lights
• active
• not active
Exterior lights are active after locking the car for a couple of seconds. Also known as ‘follow me home lights’. (ZE)

Coming home lights – turn on auto.
• active
• not active
Coming home lights (also known as ‘follow me home lights’) are turned on automatically. Whether the coming home lights are turned on when the ignition is turned off or when the doors are opened can be set via ‘Coming home lights – switch-on event’. Coming home lights are usually only possible if the light switch is set to ‘Auto’ in the car. (ZE)

Coming home lights – front fog lights
• active
• not active
Use front fog lights as coming home lights. (ZE)

Coming home lights – switch-on event
• Ignition off
• Open door
Coming home lights are turned on when the ignition is turned off or when a door is opened. To activate this function also activate ‘Coming home lights – turn on auto.’. (ZE)


Welcome lights
• active
• not active
Headlights and other lights are turned on when unlocking the car. Also known as ‘leaving home lights’. Under some circumstances this function requires a light sensor to be installed. (ZE)


Footwell Lighting with speedometer lighting
• active
• not active
Footwell lighting is turned on/off when the speedometer and instrument lighting is turned on/off. (ZE)


Cornering lights
• active
• not active
Cornering lights are active/not active. (ZE)

Cornering lights – front fog lights
• active
• not active
Use front fog lights as cornering lights. (ZE)

Cornering lights don’t turn off
• active
• not active
Cornering lights are not automatically turned off after a few seconds. (ZE)

Cornering lights – reverse gear
• active
• not active
Use cornering lights in reverse gear as well. (ZE)


Continue window function when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (ZE)

Continue window function when door is opened
• active
• not active
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (ZE)


Unlock doors when turned off
• active
• not active
All doors are unlocked after removing the key from the ignition. (ZE)

Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (ZE)

Audible confirmation for unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)

Audible confirmation – display menu
• active
• not active
Unlock menu for enabling/disabling the audible lock/unlock-confirmation in the multi function display. This function can only be unlocked in MFA+ displays. The audible lock/unlock-confirmation often requires an anti-theft alarm system to be installed. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (ZE)

Unlock doors when turned off
• active
• not active
All doors are unlocked after removing the key from the ignition. (ZE)

Optical confirmation for unlocking vehicle – keyfob
• active
• not active
Optical confirmation for unlocking vehicle via keyfob is active/not active. (KSG)

Audible confirmation for unlocking vehicle – keyfob
• active
• not active
Audible confirmation for unlocking vehicle via keyfob is active/not active. This function is often only possible if an anti-theft alarm system is installed. (KSG)

Optical confirmation for unlocking vehicle – door locks
• active
• not active
Optical confirmation for unlocking vehicle via the door locks is active/not active. (KSG)

Audible confirmation for unlocking vehicle – door locks
• active
• not active
Audible confirmation for unlocking vehicle via the door locks is active/not active. This function is often only possible if an anti-theft alarm system is installed. (KSG)


Lock vehicle at 15 kph
• active
• not active
Automatically lock the vehicle at 15 kph/9 mph. (ZE)

Audible confirmation for locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)

Audible confirmation – display menu
• active
• not active
Unlock menu for enabling/disabling the audible lock/unlock-confirmation in the multi function display. This function can only be unlocked in MFA+ displays. The audible lock/unlock-confirmation often requires an anti-theft alarm system to be installed. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Lock vehicle at 15 kph
• active
• not active
Automatically lock the vehicle at 15 kph/9 mph. (ZE)

Optical confirmation for locking vehicle – keyfob
• active
• not active
Optical confirmation for locking vehicle via keyfob is active/not active. (KSG)

Audible confirmation for locking vehicle – keyfob
• active
• not active
Audible confirmation for locking vehicle via keyfob is active/not active. This function is often only possible if an anti-theft alarm system is installed. (KSG)

Optical confirmation for locking vehicle – door locks
• active
• not active
Optical confirmation for locking vehicle via the door locks is active/not active. (KSG)

Audible confirmation for locking vehicle – door locks
• active
• not active
Audible confirmation for locking vehicle via the door locks is active/not active. This function is often only possible if an anti-theft alarm system is installed. (KSG)


Audible confirmation – display menu
• active
• not active
Unlock menu for enabling/disabling the audible lock/unlock-confirmation in the multi function display. This function can only be unlocked in MFA+ displays. The audible lock/unlock-confirmation often requires an anti-theft alarm system to be installed. (ZE)


Comfort functions – keyfob
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort functions – door locks
• active
• not active
Open/close the windows by unlocking/locking the car via the door locks for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’ via door locks. (ZE)

Comfort open only for driver door
• only driver’s door
• all doors
Comfort open is only activated for the driver’s door. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)

Comfort functions
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (KSG)

Automatic Comfort-Closing windows
• active
• not active
Windows automatically close after pressing the lock button for a few seconds. (KSG)

Comfort functions – keyfob
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. To activate this function also activate ‘Comfort functions’. (KSG)

Comfort open windows – keyfob
• active
• not active
Comfort open via keyfob for windows is active/not active. (KSG)

Comfort close windows – keyfob
• active
• not active
Comfort close via keyfob for windows is active/not active. (KSG)

Comfort open sunroof – keyfob
• active
• not active
Comfort open via keyfob for sunroof is active/not active. (KSG)

Comfort close sunroof – keyfob
• active
• not active
Comfort close via keyfob for sunroof is active/not active. (KSG)

Comfort functions – door locks driver
• active
• not active
Open/close the windows by turning the key inside the driver’s door lock for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. To activate this function also activate ‘Comfort functions’. (KSG)

Comfort functions – door locks passenger
• active
• not active
Open/close the windows by turning the key inside the passenger’s door lock for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. To activate this function also activate ‘Comfort functions’. (KSG)

Comfort functions – locks rear lid
• active
• not active
Open/close the windows by turning the key inside the rear lid’s lock for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. To activate this function also activate ‘Comfort functions’. (KSG)

Comfort open windows – door locks
• active
• not active
Comfort open via the door locks for windows is active/not active. (KSG)

Comfort close windows – door locks
• active
• not active
Comfort close via the door locks for windows is active/not active. (KSG)

Comfort open sunroof – door locks
• active
• not active
Comfort open via the door locks for sunroof is active/not active. (KSG)

Comfort close sunroof – door locks
• active
• not active
Comfort close via the door locks for sunroof is active/not active. (KSG)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)


Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)


Head light cleaning
• active
• not active
Turn head light cleaning on/off. (ZE)

Head light cleaning – splash duration
• 0.5s
• 1.0s
• 1.5s
Duration of splashes for head light cleaning. (ZE)

Head light cleaning – wiper delay
• 0.5s
• 1.0s
• 1.5s
Delay for the head light wipers after splash for head light cleaning. (ZE)

Head light cleaning – daytime running lights
• active
• not active
Turn head light cleaning on/off when daytime running lights are active. (ZE)

Auto. rear wiper in reverse gear
• active
• not active
When reverse gear is selected, the rear wipers are automatically turned on. (ZE)

Auto. rear wiper at interval position
• active
• not active
When the wiper lever is set to the ‘Interval’ position, the rear wipers are automatically turned on. (ZE)

Auto. rear wiper at permanent position
• active
• not active
When the wiper lever is set to the ‘Permanent’ position, the rear wipers are automatically turned on. (ZE)

Teardrop wiping rear
• active
• not active
Teardrop wiping for rear window. (ZE)


Head light cleaning
• active
• not active
Turn head light cleaning on/off. (ZE)

Head light cleaning – splash duration
• 0.5s
• 1.0s
• 1.5s
Duration of splashes for head light cleaning. (ZE)

Head light cleaning – wiper delay
• 0.5s
• 1.0s
• 1.5s
Delay for the head light wipers after splash for head light cleaning. (ZE)

Head light cleaning – daytime running lights
• active
• not active
Turn head light cleaning on/off when daytime running lights are active. (ZE)


Voltage monitoring
• active
• not active
Voltage monitoring is active/not active. Might cause flickering of LED lights. (ZE)

Voltage monitoring – turn signals
• active
• not active
Voltage monitoring for turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – parking lights front
• active
• not active
Voltage monitoring for parking lights front. Might cause flickering of LED lights. (ZE)

Voltage monitoring – high beams
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – low beams
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – front fog lights
• active
• not active
Voltage monitoring for front fog lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – side turn signals
• active
• not active
Voltage monitoring for side turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – parking lights rear
• active
• not active
Voltage monitoring for parking lights rear. Might cause flickering of LED lights. (ZE)

Voltage monitoring – brake lights
• active
• not active
Voltage monitoring for brake lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – license plate lights
• active
• not active
Voltage monitoring for license plate lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – rear fog lights
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – footwell lighting
• active
• not active
Voltage monitoring for footwell lighting. Might cause flickering of LED lights. (ZE)


Seat belt reminder
• active
• not active
Seat belt reminder is active/inactive. (KOMBI)

Washer fluid warning
• active
• not active
Warning for low washer fluid is shown. (KOMBI)



Typical Audi Codings


These topics can be coded in your Audi.

Daytime running lights (Northern Europe)
• active
• not active
Use front and rear exterior lights as daytime running lights (common in Northern Europe). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights (US)
• active
• not active
Use headlights as daytime running lights (common in US). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness of the activated daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – front fog lights
• active
• not active
Use front fog lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Front fog lights – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 90%
• 100%
Brightness for front fog lights. (ZE)

Daytime running lights
• active
• not active
Daytime running lights is active/not active. The daytime running lights can be customized with the codings below. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – front fog lights
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness of front fog lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – low beams
• active
• not active
Use low beams as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – Additional lights
• active
• not active
Use additional lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – off with turn signal
• active
• not active
Daytime running lights are turned off on one side when the turn signals are activated. When the hazard lights are activated, daytime running lights are turned off on both sides. To try the daytime running lights, set the light switch to position ‘0’. (ZE)


Daytime running lights (Northern Europe)
• active
• not active
Use front and rear exterior lights as daytime running lights (common in Northern Europe). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights (US)
• active
• not active
Use headlights as daytime running lights (common in US). To set the brightness of the daytime running lights, please use ‘Daytime running lights – brightness’. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness of the activated daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – front fog lights
• active
• not active
Use front fog lights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)


Turn signals front as parking light
• off
• 10%
• 20%
• 40%
• 60%
Brightness of front turn signals as parking light. (ZE)

Turn signals rear as parking light
• off
• 10%
• 20%
• 40%
• 60%
Brightness of rear turn signals as parking light. (ZE)

One-touch turn signal
• active
• not active
Activate the turn signals by tapping them. Also known as ‘Comfort turn signals’ or ‘Highway Blinking’. (ZE)


Turn signals front as parking light
• off
• 10%
• 20%
• 40%
• 60%
Brightness of front turn signals as parking light. (ZE)

Turn signals rear as parking light
• off
• 10%
• 20%
• 40%
• 60%
Brightness of rear turn signals as parking light. (ZE)

Parking light front – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness for front parking light. (ZE)

Parking light rear – brightness
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Brightness for rear parking light. (ZE)

Parking light – outer tail lights
• off
• 10%
• 20%
• 40%
• 60%
Use outer tail lights as parking light. (ZE)

Parking light – rear fog lights
• off
• 20%
• 40%
• 60%
• 80%
• 100%
Use rear fog lights as parking light. (ZE)


Unlock doors when turned off
• active
• not active
All doors are unlocked after removing the key from the ignition. (ZE)

Lock vehicle at 15 kph – rear lid
• active
• not active
Automatically lock the rear lid at 15 kph/9 mph. (ZE)

Central Locking – rear lid
• active
• not active
Lock/Unlock rear lid as well when locking/unlocking the car. (ZE)

Comfort function – confirmation
• active
• not active
Turn signals blink once when comfort opening or comfort closing is finished. (ZE)


Lock vehicle at 15 kph
• active
• not active
Automatically lock the vehicle at 15 kph/9 mph. (ZE)

Lock vehicle at 15 kph – rear lid
• active
• not active
Automatically lock the rear lid at 15 kph/9 mph. (ZE)

Central Locking – rear lid
• active
• not active
Lock/Unlock rear lid as well when locking/unlocking the car. (ZE)

Comfort function – confirmation
• active
• not active
Turn signals blink once when comfort opening or comfort closing is finished. (ZE)


Lock vehicle at 15 kph – rear lid
• active
• not active
Automatically lock the rear lid at 15 kph/9 mph. (ZE)

Central Locking – rear lid
• active
• not active
Lock/Unlock rear lid as well when locking/unlocking the car. (ZE)


Comfort functions – door locks
• active
• not active
Open/close the windows by unlocking/locking the car via the door locks for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’ via door locks. (ZE)

Comfort open only for driver door
• only driver’s door
• all doors
Comfort open is only activated for the driver’s door. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)


Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)

Comfort open mode sunroof
• lift
• open
Mode for comfort opening the sunroof. (ZE)


Coming home lights
• active
• not active
Exterior lights are active after locking the car for a couple of seconds. Also known as ‘follow me home lights’. (ZE)

Coming home lights – front fog lights
• active
• not active
Use front fog lights as coming home lights. (ZE)


Welcome lights
• active
• not active
Headlights and other lights are turned on when unlocking the car. Also known as ‘leaving home lights’. Under some circumstances this function requires a light sensor to be installed. (ZE)


Hard braking – brake lights
• active
• not active
Brake lights flash when a hard brake is performed. (ZE)

Hard braking – hazard lights
• active
• not active
Hazard lights turn on when a hard brake is performed. (ZE)


Head light cleaning
• active
• not active
Turn head light cleaning on/off. (ZE)

Head light cleaning – splash duration
• 0.5s
• 1.0s
• 1.5s
Duration of splashes for head light cleaning. (ZE)

Head light cleaning – wiper delay
• 0.5s
• 1.0s
• 1.5s
Delay for the head light wipers after splash for head light cleaning. (ZE)

Auto. rear wiper in reverse gear
• active
• not active
When reverse gear is selected, the rear wipers are automatically turned on. (ZE)

Auto. rear wiper at interval position
• active
• not active
When the wiper lever is set to the ‘Interval’ position, the rear wipers are automatically turned on. (ZE)

Auto. rear wiper at permanent position
• active
• not active
When the wiper lever is set to the ‘Permanent’ position, the rear wipers are automatically turned on. (ZE)


Head light cleaning
• active
• not active
Turn head light cleaning on/off. (ZE)

Head light cleaning – splash duration
• 0.5s
• 1.0s
• 1.5s
Duration of splashes for head light cleaning. (ZE)

Head light cleaning – wiper delay
• 0.5s
• 1.0s
• 1.5s
Delay for the head light wipers after splash for head light cleaning. (ZE)


Cornering lights
• active
• not active
Use additional lights as cornering lights. (ZE)

Cornering lights mode
• not active
• Front fog lights
• High beams
• Xenon lights
Mode of cornering lights if installed. Only change with ‘Cornering lights’. (ZE)


Voltage monitoring
• active
• not active
Voltage monitoring is active/not active. Might cause flickering of LED lights. (ZE)

Voltage monitoring – turn signals
• active
• not active
Voltage monitoring for turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – parking lights front
• active
• not active
Voltage monitoring for parking lights front. Might cause flickering of LED lights. (ZE)

Voltage monitoring – high beams
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – low beams
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – front fog lights
• active
• not active
Voltage monitoring for front fog lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – side turn signals
• active
• not active
Voltage monitoring for side turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – parking lights rear
• active
• not active
Voltage monitoring for parking lights rear. Might cause flickering of LED lights. (ZE)

Voltage monitoring – brake lights
• active
• not active
Voltage monitoring for brake lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – license plate lights
• active
• not active
Voltage monitoring for license plate lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – rear fog lights
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (ZE)


Seat belt reminder
• no warning
• only driver (EU old)
• driver and passenger (EU old)
• only driver (EU new)
• driver and passenger (EU new)
• only driver (US old)
• driver and passenger (US old)
• only driver (US new)
• driver and passenger (US new)
Seat belt reminder is active/inactive. (KOMBI)



Typical Seat Codings


These topics can be coded in your Seat.

Unlock doors when turned off
• active
• not active
All doors are unlocked after removing the key from the ignition. (ZE)

Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (ZE)

Automatically lock vehicle after 30 seconds
• active
• not active
If no door or window has been opened 30 seconds after the car has been unlocked, the doors automatically lock. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Audible confirmation for locking/unlocking vehicle
• active
• not active
Audible confirmation for locking and unlocking vehicle is active/not active. Usually the siren of the anti-theft alarm system (if installed) is used for this function. To use the horn for the audible confirmation, set ‘Audible confirmation – sound’ to ‘Horn’. (ZE)

Audible confirmation – sound
• Horn
• Anti-Theft Alarm System (if installed)
Sound for the audible confirmation for locking and unlocking the vehicle. (ZE)

Audible confirmation for unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)


Lock vehicle at 15 kph
• active
• not active
Automatically lock the vehicle at 15 kph/9 mph. (ZE)

Automatically lock vehicle after 30 seconds
• active
• not active
If no door or window has been opened 30 seconds after the car has been unlocked, the doors automatically lock. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Audible confirmation for locking/unlocking vehicle
• active
• not active
Audible confirmation for locking and unlocking vehicle is active/not active. Usually the siren of the anti-theft alarm system (if installed) is used for this function. To use the horn for the audible confirmation, set ‘Audible confirmation – sound’ to ‘Horn’. (ZE)

Audible confirmation – sound
• Horn
• Anti-Theft Alarm System (if installed)
Sound for the audible confirmation for locking and unlocking the vehicle. (ZE)

Audible confirmation for locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)


Comfort functions
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort functions – door locks
• active
• not active
Open/close the windows by unlocking/locking the car via the door locks for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’ via door locks. (ZE)

Comfort functions – keyfob
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort functions – Sunroof
• active
• not active
Sunroof is also used for ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)


Comfort functions – Sunroof
• active
• not active
Sunroof is also used for ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)


Daytime running lights
• active
• not active
Use headlights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – position lights
• active
• not active
Use configured daytime running lights as position lights as well. (ZE)


Daytime running lights – position lights
• active
• not active
Use configured daytime running lights as position lights as well. (ZE)


One-touch turn signal
• active
• not active
Activate the turn signals by tapping them. Also known as ‘Comfort turn signals’ or ‘Highway Blinking’. (ZE)


Hard braking – brake lights
• active
• not active
Brake lights flash when a hard brake is performed. (ZE)

Hard braking – hazard lights
• active
• not active
Hazard lights turn on when a hard brake is performed. (ZE)

Brake lights with ignition off
• active
• not active
Brake lights turn on when using the brakes even when the ignition is turned off. (ZE)


Interior lighting – ignition off
• active
• not active
When turning off the ignition, the interior lighting is turned on. (ZE)

Interior lighting – opening rear lid
• active
• not active
When opening the rear lid, the interior lighting is turned on. (ZE)


Interior lighting – opening rear lid
• active
• not active
When opening the rear lid, the interior lighting is turned on. (ZE)


Front fog lights with high beams
• active
• not active
When turning on the high beams, the front fog lights are turned off. (ZE)

High beams without low beams
• active
• not active
When turning on the high beams, the low beams are turned off. (ZE)


Cornering lights when using turn signals
• active
• not active
Cornering lights are turned on when using the turn signals. (ZE)

Cornering lights – front fog lights
• active
• not active
Use front fog lights as cornering lights. (ZE)

Cornering lights – reverse gear
• active
• not active
Use cornering lights in reverse gear as well. (ZE)


Voltage monitoring – turn signals
• active
• not active
Voltage monitoring for turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – high beams
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – low beams
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – daytime running lights
• active
• not active
Voltage monitoring for separate daytime running lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – front fog lights
• active
• not active
Voltage monitoring for front fog lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – tail lights
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – brake lights
• active
• not active
Voltage monitoring for brake lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – license plate lights
• active
• not active
Voltage monitoring for license plate lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – rear fog lights
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (ZE)


Seat belt reminder
• active
• not active
Seat belt reminder is active/inactive. (KOMBI)

Washer fluid warning
• active
• not active
Warning for low washer fluid is shown. (KOMBI)



Typical Skoda Codings


These topics can be coded in your Skoda.

Unlock doors when turned off
• active
• not active
All doors are unlocked after removing the key from the ignition. (ZE)

Selective central locking
• active
• not active
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (ZE)

Automatically lock vehicle after 30 seconds
• active
• not active
If no door or window has been opened 30 seconds after the car has been unlocked, the doors automatically lock. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Audible confirmation for locking/unlocking vehicle
• active
• not active
Audible confirmation for locking and unlocking vehicle is active/not active. Usually the siren of the anti-theft alarm system (if installed) is used for this function. To use the horn for the audible confirmation, set ‘Audible confirmation – sound’ to ‘Horn’. (ZE)

Audible confirmation – sound
• Horn
• Anti-Theft Alarm System (if installed)
Sound for the audible confirmation for locking and unlocking the vehicle. (ZE)

Audible confirmation for unlocking vehicle
• active
• not active
Audible confirmation for unlocking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)


Lock vehicle at 15 kph
• active
• not active
Automatically lock the vehicle at 15 kph/9 mph. (ZE)

Automatically lock vehicle after 30 seconds
• active
• not active
If no door or window has been opened 30 seconds after the car has been unlocked, the doors automatically lock. (ZE)

Optical confirmation for locking/unlocking vehicle
• active
• not active
Optical confirmation for locking and unlocking vehicle is active/not active. (ZE)

Audible confirmation for locking/unlocking vehicle
• active
• not active
Audible confirmation for locking and unlocking vehicle is active/not active. Usually the siren of the anti-theft alarm system (if installed) is used for this function. To use the horn for the audible confirmation, set ‘Audible confirmation – sound’ to ‘Horn’. (ZE)

Audible confirmation – sound
• Horn
• Anti-Theft Alarm System (if installed)
Sound for the audible confirmation for locking and unlocking the vehicle. (ZE)

Audible confirmation for locking vehicle
• active
• not active
Audible confirmation for locking vehicle is active/not active. This function is often only possible if an anti-theft alarm system is installed. (ZE)


Comfort functions
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort functions – door locks
• active
• not active
Open/close the windows by unlocking/locking the car via the door locks for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’ via door locks. (ZE)

Comfort functions – keyfob
• active
• not active
Open/close the windows by pressing the unlock/lock button on the remote for a longer period. Also known as ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort functions – Sunroof
• active
• not active
Sunroof is also used for ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)


Comfort functions – Sunroof
• active
• not active
Sunroof is also used for ‘Comfort open’ and ‘Comfort close’. (ZE)

Comfort open sunroof
• active
• not active
Comfort open for sunroof is active/not active. (ZE)

Comfort close sunroof
• active
• not active
Comfort close for sunroof is active/not active. (ZE)


Daytime running lights
• active
• not active
Use headlights as daytime running lights. To try the daytime running lights, set the light switch to position ‘0’. (ZE)

Daytime running lights – position lights
• active
• not active
Use configured daytime running lights as position lights as well. (ZE)


Daytime running lights – position lights
• active
• not active
Use configured daytime running lights as position lights as well. (ZE)


One-touch turn signal
• active
• not active
Activate the turn signals by tapping them. Also known as ‘Comfort turn signals’ or ‘Highway Blinking’. (ZE)


Hard braking – brake lights
• active
• not active
Brake lights flash when a hard brake is performed. (ZE)

Hard braking – hazard lights
• active
• not active
Hazard lights turn on when a hard brake is performed. (ZE)

Brake lights with ignition off
• active
• not active
Brake lights turn on when using the brakes even when the ignition is turned off. (ZE)


Interior lighting – ignition off
• active
• not active
When turning off the ignition, the interior lighting is turned on. (ZE)

Interior lighting – opening rear lid
• active
• not active
When opening the rear lid, the interior lighting is turned on. (ZE)


Interior lighting – opening rear lid
• active
• not active
When opening the rear lid, the interior lighting is turned on. (ZE)


Front fog lights with high beams
• active
• not active
When turning on the high beams, the front fog lights are turned off. (ZE)

High beams without low beams
• active
• not active
When turning on the high beams, the low beams are turned off. (ZE)


Cornering lights when using turn signals
• active
• not active
Cornering lights are turned on when using the turn signals. (ZE)

Cornering lights – front fog lights
• active
• not active
Use front fog lights as cornering lights. (ZE)

Cornering lights – reverse gear
• active
• not active
Use cornering lights in reverse gear as well. (ZE)


Voltage monitoring – turn signals
• active
• not active
Voltage monitoring for turn signals. Might cause flickering of LED lights. (ZE)

Voltage monitoring – high beams
• active
• not active
Voltage monitoring for high beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – low beams
• active
• not active
Voltage monitoring for low beams. Might cause flickering of LED lights. (ZE)

Voltage monitoring – daytime running lights
• active
• not active
Voltage monitoring for separate daytime running lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – front fog lights
• active
• not active
Voltage monitoring for front fog lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – tail lights
• active
• not active
Voltage monitoring for tail lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – brake lights
• active
• not active
Voltage monitoring for brake lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – license plate lights
• active
• not active
Voltage monitoring for license plate lights. Might cause flickering of LED lights. (ZE)

Voltage monitoring – rear fog lights
• active
• not active
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (ZE)


Seat belt reminder
• active
• not active
Seat belt reminder is active/inactive. (KOMBI)

Washer fluid warning
• active
• not active
Warning for low washer fluid is shown. (KOMBI)