Coding BMW Bikes with Carly for BMW Bikes List – What is possible?

Share this with friends:

At the moment codings for BMW bikes are only available on Android.

F650 (K72)


These topics can be coded in your F650 (K72).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F700 GS (K70)


These topics can be coded in your F700 GS (K70).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F800 GS Adv (K75)


These topics can be coded in your F800 GS Adv (K75).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F800 GT (K71)


These topics can be coded in your F800 GT (K71).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F800 S(T) (K71)


These topics can be coded in your F800 S(T) (K71).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F800 GS (K72)


These topics can be coded in your F800 GS (K72).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



F800 R (K73)


These topics can be coded in your F800 R (K73).

Momentary fuel consumption
• active
• not active
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Gear display
• active
• not active
Show current gear in the on board computer. (codable in KOMBI)

Stop watch
• active
• not active
Show stop watch in the on board computer. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



K1300 GT (K44)


These topics can be coded in your K1300 GT (K44).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



K1300 R (K43)


These topics can be coded in your K1300 R (K43).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



K1300 S (K40)


These topics can be coded in your K1300 S (K40).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



R1200 GS (K25)


These topics can be coded in your R1200 GS (K25).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



R1200 GS Adv (K255)


These topics can be coded in your R1200 GS Adv (K255).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



R1200 R(T) (K27)


These topics can be coded in your R1200 R(T) (K27).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



R1200 S(T) (K29)


These topics can be coded in your R1200 S(T) (K29).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



S1000 R (K47)


These topics can be coded in your S1000 R (K47).

Turn signal – time limit
• 10s
• 15s
• 20s
• 40s
• do not turn off automatically
Turn signals are automatically turned off after the set duration of seconds. (codable in KOMBI)

Turn signal – distance limit
• 0.13 mls / 210 m
• 0.22 mls / 350 m
• 0.31 mls / 500 m
• 0.62 mls / 1000 m
• do not turn off automatically
Turn signals are automatically turned off after driving the set distance. (codable in KOMBI)

Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)

Display check
• only logo
• entire display
When the ignition is turned on, the instruments display is checked. This function modifies whether the entire display is checked or only the logo is shown. (codable in KOMBI)

Check duration
• 1s
• 2s
• 5s
• 10s
• 15s
Duration of ‘Display check’ and ‘RPM meter check’. (codable in KOMBI)


Handlebar heater – memory
• active
• not active
Last state of handlebar heaters is remembered until the next start of the engine. If deactivated, the handlebar heaters are deactivated by default. (codable in KOMBI)

Handlebar heater right – level 1
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 1. (codable in KOMBI)

Handlebar heater left – level 1
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 1. (codable in KOMBI)

Handlebar heater right – level 2
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 2. (codable in KOMBI)

Handlebar heater left – level 2
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 2. (codable in KOMBI)


License plate lighting – brightness
• very low
• low
• medium
• high
• very high
Brightness of license plate lighting. (codable in KOMBI)


Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)

Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
• permanent
Standby time for the anti theft alarm system. (codable in KOMBI)


Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



S1000 RR (K46)


These topics can be coded in your S1000 RR (K46).

Turn signal – time limit
• 10s
• 15s
• 20s
• 40s
• do not turn off automatically
Turn signals are automatically turned off after the set duration of seconds. (codable in KOMBI)

Turn signal – distance limit
• 0.13 mls / 210 m
• 0.22 mls / 350 m
• 0.31 mls / 500 m
• 0.62 mls / 1000 m
• do not turn off automatically
Turn signals are automatically turned off after driving the set distance. (codable in KOMBI)

Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)

Display check
• only logo
• entire display
When the ignition is turned on, the instruments display is checked. This function modifies whether the entire display is checked or only the logo is shown. (codable in KOMBI)

Check duration
• 1s
• 2s
• 5s
• 10s
• 15s
Duration of ‘Display check’ and ‘RPM meter check’. (codable in KOMBI)


Handlebar heater – memory
• active
• not active
Last state of handlebar heaters is remembered until the next start of the engine. If deactivated, the handlebar heaters are deactivated by default. (codable in KOMBI)

Handlebar heater right – level 1
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 1. (codable in KOMBI)

Handlebar heater left – level 1
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 1. (codable in KOMBI)

Handlebar heater right – level 2
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 2. (codable in KOMBI)

Handlebar heater left – level 2
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 2. (codable in KOMBI)


License plate lighting – brightness
• very low
• low
• medium
• high
• very high
Brightness of license plate lighting. (codable in KOMBI)


Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)

Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
• permanent
Standby time for the anti theft alarm system. (codable in KOMBI)


Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



S1000 RR HP4 (K42)


These topics can be coded in your S1000 RR HP4 (K42).

Turn signal – time limit
• 10s
• 15s
• 20s
• 40s
• do not turn off automatically
Turn signals are automatically turned off after the set duration of seconds. (codable in KOMBI)

Turn signal – distance limit
• 0.13 mls / 210 m
• 0.22 mls / 350 m
• 0.31 mls / 500 m
• 0.62 mls / 1000 m
• do not turn off automatically
Turn signals are automatically turned off after driving the set distance. (codable in KOMBI)

Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)

Display check
• only logo
• entire display
When the ignition is turned on, the instruments display is checked. This function modifies whether the entire display is checked or only the logo is shown. (codable in KOMBI)

Check duration
• 1s
• 2s
• 5s
• 10s
• 15s
Duration of ‘Display check’ and ‘RPM meter check’. (codable in KOMBI)


Handlebar heater – memory
• active
• not active
Last state of handlebar heaters is remembered until the next start of the engine. If deactivated, the handlebar heaters are deactivated by default. (codable in KOMBI)

Handlebar heater right – level 1
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 1. (codable in KOMBI)

Handlebar heater left – level 1
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 1. (codable in KOMBI)

Handlebar heater right – level 2
• very low
• low
• medium
• high
• very high
Heater level of right handlebar heater on level 2. (codable in KOMBI)

Handlebar heater left – level 2
• very low
• low
• medium
• high
• very high
Heater level of left handlebar heater on level 2. (codable in KOMBI)


License plate lighting – brightness
• very low
• low
• medium
• high
• very high
Brightness of license plate lighting. (codable in KOMBI)


Turn signal – LED
• active
• not active
Turn signals are LEDs. This coding can be used to retrofit LED turn signals. (codable in KOMBI)

Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)


Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Maximum displayed speed
• 299 kph / 186 mph
• 499 kph / 310 mph
• 999 kph / 620 mph
Maximum displayed speed in the digital speedometer. This is usually locked to 299 kph / 186 mph. (codable in KOMBI)

RPM meter check
• active
• not active
When the ignition is turned on, the RPM meter is checked. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
• permanent
Standby time for the anti theft alarm system. (codable in KOMBI)


Lamp check
• active
• not active
Lamp check is enabled/disabled. This coding can be used to disable lamp errors when LED lamps are installed instead of regular lamps. (codable in KOMBI)

Voltage monitoring
• active
• not active
Voltage monitoring for the lights is enabled/disabled. Voltage monitoring can cause flickering of retrofitted LED lights. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)



R nineT (K21)


These topics can be coded in your R nineT (K21).

Service reminder – time limit
• 1 month
• 2 months
• 3 months
If the next service is closer than the set time limit, a service reminder is shown in the display. (codable in KOMBI)

Service reminder – distance limit
• 311 mls / 500 km
• 621 mls / 1000 km
• 932 mls / 1500 km
If the next service is closer than the set distance limit, a service reminder is shown in the display. (codable in KOMBI)

Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)


Disable anti theft alarm system
• active
• not active
To disable the anti theft alarm system set this option to ‘not active’. This coding cannot be used to activate a retrofitted anti theft alarm system. If you want to activate your alarm system again, activate this coding. (codable in KOMBI)

Anti theft alarm system – standby time
• 3 days
• 7 days
• 10 days
• 14 days
• 31 days
Standby time for the anti theft alarm system. (codable in KOMBI)


Service warning light – time based service
• active
• not active
Warning light for the time based service is shown. (codable in KOMBI)

Service warning light – dist. based service
• active
• not active
Warning light for the distance based service is shown. (codable in KOMBI)