Can you revert codings?

Share this with friends:

There is a backup created before each coding. This can be put back in the system using the following steps:

iPhone:

  1. Start the app
  2. Connect
  3. Change to „coding“
  4. Test compatibility
  5. Choose the module, which should be reset
  6. Read coding data
  7. Click on „back“ (at the end of the page on the left side)
  8. Click „choose back-up“
  9. Select the preferred back-up. The back-ups are sorted from old (above) to new (below).
  10. Click „Load back-up“
  11. Click „restore“

Android:

  1. Start the app
  2. Connect
  3. Change to „coding“
  4. Test compatibility
  5. Choose the module, which should be reset
  6. Click „Load back-up“ on the right side. If “load back-up” isn’t visible, scroll down on the right side.
  7. Select the preferred back-up. The back-ups are sorted from old (above) to new (below).
  8. Click „load back-up“
  9. Click „restore“